The laptop comes with tiny heads, which require a certain size of screwdriver. When it comes to removing the laptop screw it’s not an easy task need to handle it with care to remove a stripped screw from the laptop. There are many tools are available on the market. It is sometimes necessary to remove the Stripped Screw from a Laptop. If you don’t know how to Remove a Stripped Screw then follow the below various methods that can help you.
[no_toc]
Methods to Remove a Stripped Screw from a Laptop
- Rubber bands
- Drill
- Pliers
- Flathead Screwdriver
- Break out the glue
1.Using Rubber bands
With the help of rubber bands, you can remove the Screw from a Laptop. The rubber band can give you the extra grip you need. So first check the size and of the screw and take the screwdriver. stretch a rubber band over the stripped screw and give it a turn.
2. Using Drill
Drilling is hard since you have to locate a little bit smaller than the screw size. In most situations Drilling out is not a major problem but you know that the laptop has a tiny screw and drilling can permanently damage the thread. If you try this technique make sure that you use a drill bit designated for the usage in metal and not wood. The head of the screw could come off so don’t drill too deep down.
3. Using Pliers
Check the head of the screw carefully. If the daylight is between the face of the screw and its surface…
See whether a pair of locking pliers can hold the screw. You must be able to flip the pliers until the screw loosens and pulls away if you can get the tool to grip the screw firmly. This is not the least labor-consuming approach, but it works as well under the appropriate circumstances.
4. Using Flathead Screwdriver
The flathead screwdriver narrow enough to fit within the Phillips-head hole. When a screw strips, no longer fit exactly and switching to a simpler screwdriver can help gain a grip on the head. At that time try different sizes until the screwdriver grabs and turns the head.
5. Break out the glue
Using Glue you can remove the screw so take a Glue and Apply a small amount of glue to the tip of the stripped screw make sure it’s only the screw and allow the glue to dry. Using a firm grip and clockwise pressure, give the driver a twist to remove the screw.
That’s it Here the end of the article. If you want to open the screw, you need a specific screwdriver. If the screwdriver is of the wrong size, then the head can strip so you need to handle it carefully to remove a stripped screw from the laptop. So try the above methods definitely you will help.
Thank you for reading!!!!!!